Bluesound RT100 Wireless Speaker Link
With the RT100 Wireless Speaker Link, you can connect virtually any subwoofer to it without cables.That way your Pulse Soundbar can deliver even stronger midrange and highs while sending the low-frequency signal to your subwoofer.
The RT100 has both a stereo minijack input and output, so it can be used as either a transmitter or receiver. Have an older stereo or home theater receiver you'd like to add a wireless sub to? Connect one RT100 to your component to act as a transmitter, and another to the subwoofer as the receiver. You've just instantly brought your system into the 2010s.
The RT100 uses a triband RF signal, with a built-in channel selector that ensures you'll have the strongest connection.
The RT100 comes with a mini USB-to-USB power cable. Plug it into a USB port on your sub, receiver or Bluesound player to power up the device. If you have an AC adapter with a USB port, you can also use it with the RT100.
Input & Output: The RT100 Wireless Speaker Link is outfitted with a 3.5mm output for use as receiver and a 3.5mm input for use as a transmitter. When used as a wireless receiver, you will connect an analog audio cable between the 3.5mm output of RT100 and the line-level input on your powered subwoofer or speaker. When used as a wireless transmitter, you will connect an analog audio cable between the 3.5mm input of the RT100 and the line-level output of your source device.
- frequency response: 20-20,000 Hz (±0.5dB)
- analog output level: 2V
- audio latency: <18ms
tribandRF (radio frequency) transmission
- three-channel selectable switch
- range: 32.8 feet
- 3.5mm minijack output
- 3.5mm minijack input
- 14" stereo minijack-to-RCA cable
- 11" mini USB-to-USB power cable (power adapter NOT included)
- 3-3/8"W x 15/16"H x 4-3/8"D
- weight: 3 oz.
Condition - RE-CERTIFIED , NEW
to US and Canada
365 Day Warranty/Exchange